TECH OFFERS

As rapid global warming accelerates, the need for increased sustainability efforts has become a critical societal challenge. While individual lifestyle changes can contribute, their impact remains limited without broader systemic shifts. This places significant pressure on industries, particularly the fashion & textiles sector, a major contributor to climate change responsible for 10% of global greenhouse gas emissions. Decarbonising this industry is therefore crucial to achieving a sustainable future. This technology enables textiles and fabrics to remove carbon dioxide (CO2) from air. The patent-pending material functionalises textiles to capture CO2 present in air which is sequestered into a harmless mineral during the laundering process. The resultant mineral which is environmentally safe is then washed away, leaving the textile recharged to remove CO2 once more. With this technology, decarbonisation of the textiles industry can be achieved through the decentralised action of consumers utlising functionalised carbon removing products. The technology owner is interested in working with interested companies in the fashion industry value chain to test-bed this new material for carbon removing apparel and fabrics. The technology is formulated and provided in a liquid formulation, to be a drop-in process where it is embedded in textiles during the “finishing stage” (last step) of a textile mill. Some features of the carbon removing technology include: Continual recharging of functionalised textiles through normal laundering process Forms a stable and environmentally friendly mineral upon sequestration of CO2 by regular detergent Lasts at least 10 washing cycles Can be embedded with standard finishing equipment (particularly at the padding and stenting steps) Currently optimised for cellulose based textiles but proof of concept has demonstrated polyester, polyamide, wool and blends thereof This technology has been designed for textiles – both for apparel and functional fabrics. It can also be considered for non-woven materials as well as for other applications such as coatings. Facing immense pressure to reduce its environmental impact, the fashion and textiles industry, a major contributor to global warming, seeks sustainable solutions that don't disrupt its fast-paced production. With an addressable global market of US$227 billion for textiles, this innovative technology offers a solution to textile manufacturers to reduce the industry’s carbon footprint. This empowers consumers to become active participants in combating climate change, simply by choosing clothes made with this technology. Offers a proprietary, environmentally safe carbon removal solution for textile industry Continual usage of the functionalised textiles – textiles are rechargagle to remove CO2 multiple times Does not require the adoption of new machinery or processes for its implementation carbon dioxide removal, textile, additive, carbon removal, fabric, decarbonisation, fashion, clothing, materials, mineral, functionalisation, sustainable, sustainability, apparel Materials, Nano Materials, Chemicals, Inorganic, Additives, Sustainability, Low Carbon Economy

3D scanning by employing technologies like LiDAR, laser scans, TOF cameras and photogrammetry is an essential step in the process of making digital twins for the construction and built space sectors. This data is then meticulously processed, often manually, to form the 3D models for integration with Building Information Modeling (BIM) platforms and creation of accurate digital twins. The 3D models, by themselves or in conjunction with the realised Digital Twin, also help in different planning and monitoring tasks during the entire lifecycle of a building from construction to maintenance.  Obtaining the 3D cloud data from scanning and its conversion to a model is an involved process. The technology presented here eases both these processes by providing diverse options for scanning and enabling AI assisted conversion of the data obtained  to a 3D model capable of being used with BIM. The technology is compatible with multiple third party scanning solutions and also provides some native options - - mm level one shot scan using stationary laser scanner with a scan time of a few minutes. - cm level mobile LiDAR based scan. - cm level TOF flight based fast scanning. BIM conversion time is dependent on the kind of scan perfomed. For benchmarking, a test done using  THETA and BLK2Go where BLK2Go was used to walk around and scan the site while THETA was used to take necessary pictures, required conversion time of ~10 days including manual intervention, for a unit 2500 sqm in size at LOD 100. A further scanning option, using a handheld scanner requiring scans 5m apart and with a scan time of 1 second is also planned. This aims to remove the need of specialized personnel to conduct the scans. The solution also provides a model hosting option with GUI which gets automatically updated with new scan data for the same location regardless of the technology used. The previous data is still preserved and is available for review. Possible applications for the solution include - - Faster and more accurate site surveys with lesser manpower requirement. - Identification of available space at planned construction site and simulation of delivery routes, assesment of safety and workability. - Progress monitoring by using data in comparison to BIM along with assessing material requirements. - Intuitive management analysis and reduction of building lifecycle costs by monitoring parameters like human flow, energy requirements, equipment use amongst others. (Digital Twin) - Simulation of processes and optimization of production line efficiency. The technology uses AI to replace manual alignment of point cloud data and generate spacial linkages automatically thus saving substantial amount of time over current processes. The technology also provides option for an end to end solution encompassing scanning, data processing, digital twin generation and utilization. The generated results can also be hosted on a web platform which allows extension of use cases such as additional AI based solutions by third party collaborators. Infocomm, Artificial Intelligence, Green Building, Sensor, Network, Building Control & Optimisation, Smart Cities

The technology presented is an Artificial Intelligence (AI) model developed to extract essential information from scanned medical certificates. The trained model can extract pertinent details from medical certificates issued locally in Singapore and can help companies streamline their medical leave management  process by automating the approval of medical leave requests. The extracted details can also help in seamless integration with a company's existing workflow. The technology enables prompt and precise handling of leave requests and thus reduces administrative workload, processing time and errors introduced due to manual entry. The trained AI model recognizes terms and entities from scanned medical certificates. This includes but is not limited to - Clinic name Clinic address Clinic telephone number Patient name Start date of medical leave End date of medical leave Duration of medical leave The Name Entity Recognizer (NER) model is trained based on an open-source library and can be integrated with the existing workflow or system to automate the extraction of information for approval or recording purposes. The model, in its current state, is trained on a diverse dataset of medical certificates issued in Singapore and is suitable for application in systems providing Document Management and Human Resource solutions. The application of the model will particularly be useful for - Companies looking to automate their medical leave processing or application workflow. Insurance providers. Vendors specialising in Document Management, HR software solution, Payroll, and Attendance solutions.  The model can be integrated into their existing solution to value add in the processing of medicate certificates. The model is implemented using Natural Language Processing and deals with the domain of Named Entity Recognition. It has been trained using a diverse dataset of medical certificates issued in Singapore and is able to recognize entries of interest automatically from a scanned copy of the document. The model is able to take in the variation of formats, prints and naming of the entries and provide a recognizable input to the software systems making use of it. Medical Leave, Documentation Management, Named Entity Model, Human Resource Software, Medical Leave Automation Infocomm, Artificial Intelligence

This biotechnology pertains to a modular cloud-based bioprocessing system designed to streamline and enhance the cultivation and analysis of biological cultures. Addressing the complexities and constraints of traditional bioprocessing, this technology simplifies operations, making advanced bioprocessing tools accessible to a broader range of users. It has shown its versatility across various segments including educational institutions, research labs, biotech and bio-manufacturing companies and even within the food service industry, providing an efficient, flexible, affordable and scalable solution for growing biological cultures. The system comprises a base bioreactor unit with multiple add-on modules, including a multitude of environmental sensors, linear peristaltic pumps, compressed gas flow regulators, and novel stirrers & boosters. It is also controlled by a propietary cloud-based software, which provides a number of benefits for device management. This allows the user to access the bioreactor from anywhere, monitor experiments in real-time, and receive alerts for any errors. The modularity provides flexibility in the co-development of various bio-manufacturing applications, especially in streamlining production.      This technology is applicable in industries ranging from bio-medical to bio-pharma to food tech to environment tech. It serves as a foundation for products like vaccines, metabolites, cultured meats, fermented foods, biofuels, adjuvants, microbial inoculants, etc. It is especially relevant for R&D departments and educational programs focused on biotechnology and life sciences. The technology surpasses current market offerings with its modular design, ease of use, flexibility and affordability, enabling users to customize their setup according to their needs without extensive training or investment, thus democratizing advanced bioprocessing. Bioprocessing, Modular Bioreactor, Cell Culture, Microbial Cultivation, Synthetic Biology Culture, Scalable Biotechnology, Biotech Education, Advanced Biomanufacturing, Cultivated Meats, Alternative Proteins, Bio-Medical, Bio-Pharma, Fermentation, Precision Fermentation, Traditional Fermentation Foods, Processes

Near-infrared (NIR) light, part of the electromagnetic spectrum just beyond visible light, has various applications, particularly in vital sensing and food analysis. However, existing technologies for generating NIR light present certain limitations. Traditional halogen lamps can emit a continuous spectrum from visible to NIR wavelengths but pose challenges such as considerable heat generation, short lifetime, and difficulties in light distribution control. As a modern alternative, near-infrared LED arrays offer advantages such as no heat radiation and long lifespan. However, they are not suitable for applications requiring a wide wavelength range due to a lack of continuous output across the entire NIR spectrum. The wavelength intensity variation of NIR-LED arrays also affected the consistency of sensing and analysis. To overcome these challenges, the technology owner has developed a unique NIR phosphor as a heat-free light source with a wide spectrum range, enabling degradation-free analysis. Especially in food analysis, prolonged exposure to a halogen lamp may damage food. In addition, the long lifetime of this NIR source reduced the need for frequent replacements, leading to cost savings. Moreover, it can irradiate broadband NIR light from a single source, enabling easy light distribution control and wavelength axis alignment and reducing wavelength intensity variation within the irradiation plane. These advantages ensure consistency and accuracy in sensing and analytical applications. The technology owner is seeking R&D collaborations with industrial partners interested in integrating this advanced NIR light source into their applications. Compared to conventional near-infrared LED light sources, this NIR light source has a broader spectrum width, making it more suitable for spectroscopic measurements, especially those using multiple wavelengths. Key features of this technology are: Wideband spectrum: 450nm to 1000nm (over 1000nm is under development) Output: approximately 3W per module Adjustable spectral shape and light distribution angle to meet different needs Easy light focusing control and uniform wavelength intensity on the irradiation surfaces Long product life: 40,000 hours (LED chip guaranteed time), 40 times longer than typical lifespan of halogen lamps Minimal accuracy loss due to temperature changes: output drops by 8% only when the temperature increases from 25°C to 75°C, compared to a 27% drop of other products This unique near-infrared light source can be widely applied to night vision, non-contact vital sensing, food analysis, medical diagnosis, agricultural analysis, and other fields. Potential applications include (but are not limited to): Night vision: surveillance camera, traffic monitoring system, etc. Non-contact vital sensing: health monitoring (heart rate, oxygen saturation), self-health care, etc. NIR spectroscopy: foreign matter inspection, fruit and vegetable analysis, internal quality check, fresh food quality control, etc. Fluorescence imaging: endoscope, fundus camera, etc. Wide wavelength range and adjustable spectral shape No heat generation: enable degradation-free analysis Long product life: reduce maintenance frequency and costs Enhance the consistency and accuracy of sensing and analysis near-infrared spectroscopy, vital sensing, night vision, Light source Electronics, Lasers, Optics & Photonics, Healthcare, Diagnostics, Foods, Quality & Safety

Paper packaging is a versatile material used for a wide range of products. Its widespread adoption is due to its renewable and relatively low-cost resource along with environmental benefits such as recyclability and biodegradability. While paper packaging offers several advantages, some drawbacks of the material include porosity and the lack of barrier properties against moisture, oil, and grease. To overcome these limitations, conventional coatings such as polyethylene (PE) or polyfluoroalkyl substances (PFAS) have been employed to impart the required barrier protection. However, during the paper recycling process, it is difficult to repulp the coated paper due to several factors and results in reduced recyclability of such packaging materials. The technology on offer is a water-based coating formulation that can be applied onto paper packaging surfaces to act as a barrier against grease, liquid water, and water vapour. The coating imparts barrier protection functionalities, improving the paper’s resistance to grease, liquid water, and water vapor significantly. Use of bio-sourced constituents in the coating also improves product sustainability. As the coating’s constituents are repulpable, recyclability of the paper packaging can be achieved. With increasing awareness of reducing packaging waste, the deployment of this technology will offer companies a recyclable paper packaging with notable barrier properties. The technology owner is seeking for R&D co-development, test bedding and IP out licensing opportunities of this technology with interested companies. The water-based barrier coating technology has the following features: Consists of bio-sourced constituents to improve product sustainability Enables repulping of coated paper, largely improving recyclability of such packaging materials Improved barrier to water vapour transmission (WVTR) - WVTR value as low as 100 g/m2.day (based on ASTM E96) Improved liquid water resistance - Cobb60 value as low as 10 g/m2 (based on TAPPI T441) Improved grease resistance - a KIT rating as high as 12 (based on TAPPI T559) Easily applied by standard coating equipment Potential applications include (but are not limited to): Paper-based food packaging Paper boards, bags, and shipping sacks Products requiring enhanced barrier paper packaging Improves paper-based product recyclability while improving barrier properties of the paper Utilisation of bio-sourced constituents in coating formulation increases product sustainability Offers an alternative to PE and PFAS coated paper that are difficult to repulp coating, barrier, packaging, paper, water-based, recycling, recyclable, pulp, sustainability, sustainable, circular economy Chemicals, Coatings & Paints, Foods, Packaging & Storage, Organic, Bio-based, Sustainability, Circular Economy

There is a high demand for invitro diagnosis (IVD) test kits for various diseases in ASEAN and this technology is suited to provide product support to commercialise IVD test kits especially for public health problems faced in ASEAN. Produced under ISO13485 certified production, the IVD tests have high sensitivity and specificity, especially supporting the specific types of local ASEAN microorganisms detection. The technology services have supported the production of test kits for infectious disease for specific conditions such as Covid-19 and Leptospirosis. There are varieties of detection platforms which has been used in clinical laboratory system in hospital and clinic in remote areas. However, to improve the quality of produced IVD test kits,  standarised production process under the ISO13485 requirements are provided. Until now, the IVD test technologies that the technology provider can support include: Lateral flow-based assay test kit Immunological-based diagnostic test kits Biomolecular detection for IVD By providing standardised production facility, the technology provider is able to service the following potential applications:  Produce the highest risk class of IVD test kits that professionals require and can be widely used in Clinical Laboratory Analysis or Medical Technology Units for laboratory diagnosis services in hospitals. Produce IVD test kits for home use such as Point of Care Testing kits which offers personal care with easy-to-read and yourself analysis. Test kits needed for the veterinary and food-supporting industries. Supported under the Center of Excellent in Medical Innovative Development and Accelerating Support for Commercialization (MIDAS Center), the Technology Acelerator specifically designed to empower resarchers in advancing their medical IVD test kits. The technology provider focuses on taking research and innovation to IVD product development, ensuring all kits meet the international standards and can gain FDA approval worldwide. IVD kits, ISO13485, Manufacturing, Invitro diagnostics, infectious diseases Healthcare, Diagnostics, Medical Devices

Alzheimer’s disease (AD) is a neurodegenerative disease that mainly affects individuals above the age of 65. However, most patients are diagnosed only when significant symptoms appear, by which time severe brain pathology and neuronal cell death have already occurred, resulting in significant brain atrophy. Consequently, the optimal treatment window is often missed, leading to a fatal outcome. The technology is a simple, non-invasive, and accurate diagnostic solution for Alzheimer’s disease (AD), which can distinguish patients with AD from healthy people and evaluate disease status from a single drop of blood, with more than 96% accuracy. By combining proprietary machine learning algorithms for data analysis, this cutting-edge technology can be applied towards developing a clinical tool for population-scale screening, early diagnosis, staging and monitoring of the disease. The technology consists of the following main parts: With the advancement of ultrasensitive and high-throughput blood-based protein measurement technology (i.e. proximity extension assay), a simple and reliable blood test has been developed for AD diagnosis, by detecting a customized panel of novel plasma protein biomarkers. The test can detect AD 5-10 years before clinical symptoms manifest. Based on a proprietary self-developed algorithm, this system can differentiate among the early, intermediate, and late stages of AD, and can also be used to monitor the progression of the disease over time. Early diagnosis of Alzheimer’s disease Large-scale screening of Alzheimer’s disease Disease staging and progressing monitoring for Alzheimer’s disease, which can facilitate personalized intervention The global Alzheimer's Disease Diagnostics and Therapeutics Market is expected to reach USD 21.7 billion by 2030, at a CAGR of 5.5% during the forecast period 2021 to 2030. The market for Alzheimer's disease diagnostics and therapies was influenced by the outbreak of the COVID-19 pandemic when it first appeared. The increasing use of biomarkers in Alzheimer's diagnosis and the development of new drugs are the primary factors driving the expansion of the Alzheimer's disease diagnostics and therapeutics market. Another important factor is the rising incidence of Alzheimer's disease worldwide. The uniqueness of this technology includes several key features: Advanced data analytic tools and machine learning algorithms have been employed to achieve accurate and early detection of AD at 5-10 years before symptoms appear (accuracy above 96%). Notably, the disease-modifying drug Lecanemab has recently been approved for treatment of early AD patients by the Food and Drug Administration in USA. Accurate early detection of AD will help patients initiate medications and intervention in a timely and effective manner. This technology employs a multi-dimensional analysis approach to evaluate the status of different human body systems related to AD, including the immune, metabolic, neural, and vascular systems. This provides a more comprehensive assessment of an individual’s AD upon disease progression, enabling personalized analyses and suggestions tailored to each individual’s unique circumstances. This technology offers risk prediction by classifying individuals into different levels of AD risk, enabling targeted control and management of disease risks. Lastly, this technology facilitates close monitoring through regular testing, ensuring that AD risk or disease progression is closely tracked. By combining these features, the technology offers a holistic approach to early detection, risk assessment, and management of AD. alzheimers disease, biomarker, blood based biomarker, AD detection, early diagnosis Healthcare, Diagnostics, Pharmaceuticals & Therapeutics

The skincare industry is seeing an upward exponential shift in consumer preferences for natural and sustainable products with stricter regulations on materials and components bans which has been shown to result in long-term harm to the well-being of users. The current skincare chemicals and materials in the market possess various health challenges such as skin irritation and allergy where skincare and cosmetic companies are increasingly sourcing for sustainable, renewable, and safe bio-based materials. This technology presents a scalable solution to produce a bioingredient, nanofibrillated cellulose to replace petroleum-based materials in skincare.  Cellulose is an abundant material in nature, this technology develops a process to extract nanofibrillated cellulose for various applications. Nanofibrillated cellulose is a renewable biopolymer with high flexibility in structure which enables it to exhibit increased mechanical strength, optical, thermal and fluidic properties compared to cellulose. The nanostructure and rich hydroxyl groups allows for modifications in hybridization to fabricate materials ranging from films, membranes, soft gels and creams at reduced size and porosity.  The product has been validated to have excellent water retention, is highly biocompatible and can be applied as a thickening agent, emulsifiers, humectants, texture, and viscosity modifiers. Functional and cytotoxicity tests are completed to ensure the safety of the material. The technology owner is seeking to work with OEMs of skincare and cosmetic products to advance their business where sample testing are available.  The cellulose are fabricated into nano-sized to deliver the excellent properties such as:  Water retention: Nano structure of fibrils are rich with hydroxyl group to bond and interact with active compound. Gel and film forming: Nano structure of fibrils can overlap to form nanolayer film on the target area. High biocompatibility: Tested on human cell model. Surfactant: Emulsifier, texture and viscosity modifier. Carrier for actives: To replace chemical compounds in skincare and cosmetics. Improved the release of actives more than 10x.  The potential applications of the ingredient in skincare and cosmetic products include:  Exfoliating Scrub: Gently removes dead skin cells and impurities. Mask sheet: Increase moisture, store, and release active ingredients while adhering to the skin and forming a protective film. Creams and lotions: Helps to improve texture, smoothness, increase moisture, dispersion, retention, and release of active ingredients. Nail polish: Helps adhere to the surface and create a film layer. Nanofibrillated cellulose can also be used in the field of healthcare for wound dressings, drug delivery, medical diagnostics, smart sensors and electronic skin.  The global skincare sector was valued at $131.5 billion in 2022 and is forecasted to generate a CAGR of 4% over 2022–2027, to reach $160.2 billion in 2027. In volume terms, the sector is forecasted to grow from 17.3 billion units in 2022 to 18.6 billion units in 2027, at a CAGR of 1.4%. Thailand's skincare market generated a revenue of $466.80 million in 2022, making it a significant sector of economic growth.  Sustainability: To offer a sustainable solution to petroleum-based materials commonly used in skincare products. This addresses the growing demand for environmentally friendly and renewable ingredients. In Thailand, cellulose is produced from biomass which is abundant and are common upcycling materials. Consumer Health: It is designed with a focus on consumer health, as it does not pose the health challenges (such as skin irritation and allergies) as some of the current skincare chemicals and materials on the market. Versatile Application: The material has a wide range of applications in skincare and cosmetics, serving as a thickening agent, emulsifier, humectant, texture and viscosity modifier. This versatility makes it valuable for various product formulations. Biocompatibility: It boasts excellent biocompatibility, ensuring that it is well-suited for use on the skin, which is crucial for skincare and cosmetic products. Regulatory Compliance: Given the increasing regulatory scrutiny on skincare product ingredients, this material is FDA-approved and GRAS certified for safe and compliant ingredients. Scalable: Less expensive than petroleum-based materials, excellent biodegradability and mechanical strength while being resistant to high heat and chemical. Bioingredient, Skincare, Nanotechnology, Biocompatible material Materials, Nano Materials, Personal Care, Cosmetics & Hair, Healthcare, Medical Devices